|
S-Con
MD
Medical
Grade Silicone Tubing
- All ingredients
are non-toxic and FDA sanctioned for use with food contact
surfaces
- Silicone elastomer
meets USP class VI requirements
- Manufactured
under Good Manufacturing Practices (GMP) in a controlled
environment
- Reusable -
will withstand repeated sterilization
- Non-reactive
to body tissues and fluids
- Translucent
natural color for visual contact with the flow
- Odorless, tasteless,
and inert
S-Con MD tubing
surface properties resist sticking and encrustation, and will
not support bacteria growth. The tubing is soft, pliable,
and contains no plasticizers which could leach out, causing
flow contamination or tube hardening.
Radiopaque tubing can be supplied with the Barium Sulfate
opaquing agent, either fully dispersed throughout the tubing,
co-extruded as striping on the outer surface, or fully encapsulated
within the wall.
Peroxide-cured S-Con MD tubing is supplied in individual,
non-sterile, heat-sealed polybags and should be sterilized
prior to use. If tubing is exposed to repeated steam sterilization
or long-term high temperature or pressure, silicone will eventually
relax, become gummy, and should be replaced.
Note: S-Con MD is not recommended for implant or in-body uses.
Care is recommended in the selection and application of fittings
and clamps. Sharp, barbed fittings or unlined metal clamps
could tear into the tubing wall.
For
more information on this product, call TPI Customer Service
at 888-554-6400 or download
the product literature now.
You will
need Acrobat Reader to view this pdf, it can be downloaded
here.
|
