|
S-Con
MDX
Platinum
Cured Medical Grade Silicone Tubing
- Silicone elastomer
meets USP class VI requirements
- Manufactured
under Good Manufacturing Practices (GMP) in a controlled
environment
- Platinum cured
for the highest degree of purity (least extractables)
- Reusable -
will withstand repeated sterilization
- Non-reactive
to body tissues and fluids
- Radiopaque
tubing available with minimum runs
S-Con MDX tubing
surface properties resist sticking and encrustation, and will
not support bacteria growth. The tubing is soft, pliable,
and contains no plasticizers which could leach out, causing
flow contamination or tube hardening. Radiopaque tubing can
be supplied with the Barium Sulfate opaquing agent, either
fully dispersed throughout the tubing, co-extruded as striping
on the outer surface of the tubing, or fully encapsulated
within the wall.
Platinum cured S-Con MDX tubing is supplied in non-sterile,
individual, heat-sealed polybags and should be sterilized
prior to use. If tubing is exposed to repeated steam sterilization
or long-term high temperature or pressure, silicone will eventually
relax, become gummy, and should be replaced.
Note: S-Con MDX is not recommended for implant or in-body
uses. Care is recommended in the selection and application
of fittings and clamps. Sharp, barbed fittings or unlined
metal clamps could tear into the tubing wall.
For
more information on this product, call TPI Customer Service
at 888-554-6400 or download
the product literature now.
You will
need Acrobat Reader to view this pdf, it can be downloaded
here.
|
