|
Silbrade
Medical®
Medical Grade Reinforced Silicone Hose
- All ingredients
are non-toxic and FDA-sanctioned for use with food contact
surfaces
- Open mesh polyester
braiding incorporated within the walls of silicone tubing
- Silicone elastomer
meets USP class VI requirements
- Translucent
natural color for visual contact with the flow
- Able to resist
extreme temperature variation: -80°F to 350°F
- Odorless, tasteless,
and inert
The Silbrade Medical
hose is made of a core of silicone elastomer, an open polyester
braid reinforcing layer, and a cover layer of silicone elastomer.
Lot traceability is applicable to all Class VI ingredients.
The hose's smooth bore, coupled with its resistance to allow
material to adhere to the tube wall, facilitates easy cleaning
and system purging. Silbrade Medical may be low-pressure steam
sterilized in-line or autoclaved at up to 250°F in a normal
autoclaving cycle. However, if exposed to repeated steam sterilization
or long-term high temperature or pressure, silicone will eventually
relax, become gummy, and should be replaced.
The peroxide-cured Silbrade Medical hose is supplied in individual,
non-sterile, heat-sealed polybags and should be sterilized
prior to use.
Note: Silbrade Medical is not recommended for implant or in-body
uses. Care is recommended in the selection and application
of fittings and clamps. Sharp, barbed fittings or unlined
metal clamps could tear into the hose wall and cause possible
failure, especially at elevated pressures.
For
more information on this product, call TPI Customer Service
at 888-554-6400 or download
the product literature now.
You will
need Acrobat Reader to view this pdf, it can be downloaded
here.
|
