MDX Braid
Platinum Cured Braid Reinforced Medical Grade Silicone Hose

• Silicone elastomer meets USP class VI requirements
• Manufactured under Good Manufacturing Practices (GMP) in a controlled environment
• Platinum cured for the highest degree of purity (least extractables)
• Open mesh polyester braiding incorporated within the walls offers increased pressure capabilities
• Non-reactive to body tissues and fluids
• Reusable - will withstand repeated sterilization

The construction of platinum-cured MDX Braid consists of a core of silicone elastomer, an open polyester braid reinforcing layer, and a covering of silicone elastomer. The braid reinforcement allows for increased pressure usage over unreinforced silicone tubing.

MDX Braid hose surface properties resist encrustation, and will not support bacteria growth. The hose is pliable and contains no plasticizers.

Radiopaque hose can be supplied with the Barium Sulfate opaquing agent, either fully dispersed throughout the hose, co-extruded as striping on the outer surface, or fully encapsulated within the wall.

If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually become gummy and should be replaced.

Note: MDX Braid is not recommended for implant or in-body uses. Care is recommended in the selection and application of fittings and clamps. Sharp, barbed fittings or unlined metal clamps could tear into the hose wall and cause possible failure.

For more information on this product, call TPI Customer Service at 888-554-6400 or download the product literature now.

You will need Acrobat Reader to view this pdf, it can be downloaded here.